Design and control of a multi-fingered robot hand provided with tactile feedback

The design, construction, control and application of a three fingered robot hand with nine degrees of freedom and built-in multi-component force sensors is described. The adopted gripper kinematics are justified and optimized with respect to grasping and manipulation flexibility. The hand was constructed with miniature motor drive systems imbedded into the fingers. The control is hierarchically structured and is implemented on a simple PC-AT computer. The hand's dexterity and intelligence are demonstrated with some experiments

SU8 etch mask for patterning PDMS and its application to flexible fluidic microactuators.

Over the past few decades, polydimethylsiloxane (PDMS) has become the material of choice for a variety of microsystem applications, including microfluidics, imprint lithography, and soft microrobotics. For most of these applications, PDMS is processed by replication molding; however, new applications would greatly benefit from the ability to pattern PDMS films using lithography and etching. Metal hardmasks, in conjunction with reactive ion etching (RIE), have been reported as a method for patterning PDMS; however, this approach suffers from a high surface roughness because of metal redeposition and limited etch thickness due to poor etch selectivity. We found that a combination of LOR and SU8 photoresists enables the patterning of thick PDMS layers by RIE without redeposition problems. We demonstrate the ability to etch 1.5-μm pillars in PDMS with a selectivity of 3.4. Furthermore, we use this process to lithographically process flexible fluidic microactuators without any manual transfer or cutting step. The actuator achieves a bidirectional rotation of 50° at a pressure of 200 kPa. This process provides a unique opportunity to scale down these actuators as well as other PDMS-based devices.BG is a Doctoral Fellow of the Research Foundation—Flanders (F.W.O.), Belgium. MDV acknowledges support from the ERC starting grant HIENA (no. 337739)

Body Wall Force Sensor for Simulated Minimally Invasive Surgery: Application to Fetal Surgery

Surgical interventions are increasingly executed minimal invasively. Surgeons insert instruments through tiny incisions in the body and pivot slender instruments to treat organs or tissue below the surface. While a blessing for patients, surgeons need to pay extra attention to overcome the fulcrum effect, reduced haptic feedback and deal with lost hand-eye coordination. The mental load makes it difficult to pay sufficient attention to the forces that are exerted on the body wall. In delicate procedures such as fetal surgery, this might be problematic as irreparable damage could cause premature delivery. As a first attempt to quantify the interaction forces applied on the patient's body wall, a novel 6 degrees of freedom force sensor was developed for an ex-vivo set up. The performance of the sensor was characterised. User experiments were conducted by 3 clinicians on a set up simulating a fetal surgical intervention. During these simulated interventions, the interaction forces were recorded and analysed when a normal instrument was employed. These results were compared with a session where a flexible instrument under haptic guidance was used. The conducted experiments resulted in interesting insights in the interaction forces and stresses that develop during such difficult surgical intervention. The results also implicated that haptic guidance schemes and the use of flexible instruments rather than rigid ones could have a significant impact on the stresses that occur at the body wall

Hardware Sequencing of Inflatable Nonlinear Actuators for Autonomous Soft Robots

Soft robots are an interesting alternative for classic rigid robots in appli-cations requiring interaction with organisms or delicate objects. Elastic inflatable actuators are one of the preferred actuation mechanisms for soft robots since they are intrinsically safe and soft. However, these pneumatic actuators each require a dedicated pressure supply and valve to drive and control their actuation sequence. Because of the relatively large size of pres-sure supplies and valves compared to electrical leads and electronic control-lers, tethering pneumatic soft robots with multiple degrees of freedom is bulky and unpractical. Here, a new approach is described to embed hardware intelligence in soft robots where multiple actuators are attached to the same pressure supply, and their actuation sequence is programmed by the inter-action between nonlinear actuators and passive flow restrictions. How to model this hardware sequencing is discussed, and it is demonstrated on an 8-degree-of-freedom walking robot where each limb comprises two actua-tors with a sequence embedded in their hardware. The robot is able to carry pay loads of 800 g in addition to its own weight and is able to walk at travel speeds of 3 body lengths per minute, without the need for complex on-board valves or bulky tethers.ERC starting gran

Switching dynamics of surface stabilized ferroelectric liquid crystal cells: effects of anchoring energy asymmetry

We study both theoretically and experimentally switching dynamics in surface stabilized ferroelectric liquid crystal cells with asymmetric boundary conditions. In these cells the bounding surfaces are treated differently to produce asymmetry in their anchoring properties. Our electro-optic measurements of the switching voltage thresholds that are determined by the peaks of the reversal polarization current reveal the frequency dependent shift of the hysteresis loop. We examine the predictions of the uniform dynamical model with the anchoring energy taken into account. It is found that the asymmetry effects are dominated by the polar contribution to the anchoring energy. Frequency dependence of the voltage thresholds is studied by analyzing the properties of time-periodic solutions to the dynamical equation (cycles). For this purpose, we apply the method that uses the parameterized half-period mappings for the approximate model and relate the cycles to the fixed points of the composition of two half-period mappings. The cycles are found to be unstable and can only be formed when the driving frequency is lower than its critical value. The polar anchoring parameter is estimated by making a comparison between the results of modelling and the experimental data for the shift vs frequency curve. For a double-well potential considered as a deformation of the Rapini-Papoular potential, the branch of stable cycles emerges in the low frequency region separated by the gap from the high frequency interval for unstable cycles.Comment: 35 pages, 15 figure

Elastic Inflatable Actuators for Soft Robotic Applications

The 20th century’s robotic systems have been made out of stiff materials and much of the developments in the field have pursued ever more accurate and dynamic robots which thrive in industrial automation settings and will probably continue to do so for many decades to come. However, the 21st century’s robotic legacy may very well become that of soft robots. This emerging domain is characterized by continuous soft structures that simultaneously fulfil the role of robotic link and robotic actuator, where prime focus is on design and fabrication of the robotic hardware instead of software control to achieve a desired operation. These robots are anticipated to take a prominent role in delicate tasks where classic robots fail, such as in minimally invasive surgery, active prosthetics and automation tasks involving delicate irregular objects. Central to the development of these robots is the fabrication of soft actuators to generate movement. This paper reviews a particularly attractive type of soft actuators that are driven by pressurized fluids. These actuators have recently gained substantial traction on the one hand due to the technology push from better simulation tools and new manufacturing technologies including soft-lithography and additive manufacturing, and on the other hand by a market pull from the applications listed above. This paper provides an overview of the different advanced soft actuator configurations, their design, fabrication and applications.This research is supported by the Fund for Scientific Research-Flanders (FWO), and the European Research Council (ERC starting grant HIENA)

Haptic Guidance in Comanipulated Laser Surgery for Fetal Disorders

The current techniques in minimal invasive surgery allow to treat fetal disorders. In fetal interventions very precise instrument manipulation is required from the surgeon. For instance in the treatment of the twin-to-twin transfusion syndrome (TTTS) it is crucial that the surgeon maintains a specific distance between the tip of the employed instrument and the placenta, while lasering target sites on the placenta. To facilitate this procedure, we suggest a new approach where the surgeon comanipulates the instruments together with a robotic stabilizer arm. The stabilizer arm provides haptic guidance to the surgeon, augmenting the surgeon's dexterity and precision. The first results show that this approach is promising

Evaluation of Haptic Feedback on Bimanually Teleoperated Laparoscopy for Endometriosis Surgery

Robotic minimal invasive surgery is gaining acceptance in surgical care. In contrast with the appreciated 3D vision and enhanced dexterity, haptic feedback is not offered. For this reason robotics is not considered beneficial for delicate interventions such the endometriosis. Overall, haptic feedback remains debatable and yet unproven except for some simple scenarios such as Fundamentals of Laparoscopic Surgery exercises. OBJECTIVE: The present work investigates the benefits of haptic feedback on more complex surgical gestures, manipulating delicate tissue through coordination between multiple instruments. Methods: A new training exercise, “Endometriosis Surgery Exercise” (ESE) has been devised approximating the setting for monocular robotic endometriosis treatment. A bimanual bilateral teleoperation setup was designed for laparoscopic laser surgery. Haptic guidance and haptic feedback are respectively offered to the operator. User experiments have been conducted to i) assess the validity of ESE and to ii) examine possible advantages of haptic technology during execution of bimanual surgery. RESULTS: i) Content and face validity of ESE was established by participating surgeons. Surgeons suggested ESE also as a means to train lasering skills, ii) interaction forces on endometriotic tissue were found to be significantly lower when a bilateral controller is used. Collisions between instruments and the environment were less frequent and so were situations marked as potentially dangerous. CONCLUSION: This study provides some promising results suggesting that haptics may offer a distinct advantage in complex robotic interventions were fragile tissue is manipulated. SIGNIFICANCE: Patients need to know whether it should be incorporated. Improved understanding of the value of haptics is important as current commercial surgical robots are widely used but do not offer haptics